Two reports say a business has 60% and 43% share of voice. Both count the same three appearances. The first divides by the five answers the team actually observed. The second divides by the seven business placements awarded to the tracked competitors. Both calculations can help an owner, but they answer different questions. Until you know what was counted and what went into the denominator, the percentage tells you very little.
Use a fixed set of brands and a defined batch of answers when you want to compare placement share. Report answer coverage beside it, so the reader can see whether the brand appeared often or simply accounted for a large fraction of a small set of mentions. AI Visibility’s enquiry measurement guide follows visits and outcomes. This walkthrough stops at the answer and defines how to count what appears there. AI Visibility referral-to-enquiry guide
Choose the decision before choosing the denominator
If the owner wants to know whether the company appears at all in sampled answers, use an answer appearance rate. The numerator is the number of eligible observed answers in which it appears at least once. The denominator is the number of eligible observed answers. Several brands can appear in one answer, so their individual appearance rates can add up to more than 100%.
If the owner wants to compare the allocation of named placements among a fixed group of competitors, use tracked placement share. Count one placement for each eligible brand in each answer, then divide the brand’s total by all placements for the tracked brands in that same sample. A repeat of the same name in one answer counts once under this definition. This choice avoids giving extra weight to a brand simply because an answer repeats its name in several paragraphs.
| Measurement | Numerator | Denominator |
|---|---|---|
| Answer appearance rate | Answers naming the brand | Eligible observed answers |
| Tracked placement share | Brand-answer placements for one tracked brand | All placements for the fixed tracked group |
| Citation appearance rate | Answers with a qualifying citation to the brand | Eligible observed answers |
| Answer capture coverage | Answers successfully observed under the protocol | Planned runs |
| Untracked placement count | Qualifying placements outside the fixed group | Report as a count, or divide by all eligible placements if measuring outside share |
Choose whether an answer that names no business stays in the analysis. It should normally remain in the denominator for a rate measuring appearance across eligible observed answers. It contributes zero placements to placement share. A planned run that failed to return an observable answer is different. Mark it missing and report capture coverage. Do not turn a failed capture into a definite absence of all brands.
An advertising report may also use a metric called share. Google Ads defines Search impression share using received impressions and estimated eligible impressions. A prompt panel has neither that impression count nor that eligibility estimate. Give your calculation a name that explains its own denominator. Google Ads API metric definitions
Freeze the prompt panel and the comparison group
Write down the category and geography you want to monitor. Choose questions that represent the decisions customers actually make. Record the exact text, language, product surface and any relevant location or session settings. Decide how many repeats you plan and how you will distribute them across prompts. A panel with twice as many restaurant questions as dental questions will give those restaurant answers more influence in a pooled count. If that reflects the business question, say so. Otherwise report the groups separately or specify weights in advance.
Define the comparison set before reading the answers. Use stable identifiers for the tracked companies and list the aliases that qualify. An English trading name, an Arabic rendering and a branch label may refer to the same business. A group brand and a separately operated company can require different treatment. Decide whether the observation is about the parent, branch or trading brand before consolidating names.
DESCO’s official Reel promotes finishing services across branches. It illustrates the scope decision a reviewer may face when an answer names a company in one line and a particular location in another. If the measurement concerns a branch, keep the branch evidence. If it concerns the chain, define how branch names roll up and deduplicate within the answer. The Instagram post is evidence of the publisher and promotional scope. It is outside the answer denominator. Official DESCO Instagram Reel
Set an explicit rule for mentions. A recommendation list, a passing reference in prose and a cited domain are different observations. A supplier directory might be cited without any tracked business being named. A business can be named without a link to its website. Record the evidence type in separate fields and use the same rule across the whole sample. Leave ambiguous matches flagged for review instead of assigning them to the brand that seems most likely.
Calculate the two metrics side by side
Consider a fictional comparison group of three businesses, A, B and C. Six runs were planned. Five answers were captured. Their named placements were A and B, A alone, B and C, no qualifying brand, and A and C. The sixth planned run is missing. The five observed answers contain seven placements across the tracked group.
Business A appeared in three of the five observed answers, giving a 60% answer appearance rate. It accounted for three of the seven tracked placements, giving a 42.9% placement share. B and C each contributed two placements. Capture coverage was five out of six planned runs, or 83.3%. Keep all three denominators in the report. A reader should be able to see what would change if the missing run had produced another observed answer.
Report a zero only when its denominator is defined. If all eligible answers name no tracked brand, each brand has zero appearances in the observed batch, but tracked placement share is undefined because the denominator is zero. If all captures failed, the answer appearance rate is undefined as well. An empty or unavailable result should look different from a measured zero.
Treat rounding as a display decision. Keep the integer counts and derive percentages from them. When comparing periods, calculate from the underlying counts rather than averaging percentages with different denominators. If you intentionally give each prompt equal weight, calculate that form separately and label it. A pooled placement calculation gives answers with more eligible names more influence by design.
Use published evidence without extending its claims
A published Lunasol study recorded twelve Google AI Mode answers on 21 September 2026, one per sector. Its per-run table contains 78 named-business placements and 100 distinct-host placements counted within runs, with 64 confirmed matches between those categories. Recalculating the published totals gives 64 divided by 78, or about 82.1%, from the naming side. From the citation side, 64 divided by 100 is 64.0%. The article also reports one arguable named-business placement and two arguable host placements. Those were left in their respective denominators and were not treated as confirmed matches. Lunasol’s published 12-run study
These are match proportions. They do not give the share of voice of a particular company or a fixed competitor group. They illustrate why counting names and counting hosts are separate operations. The study uses a published entry-label rule for named businesses and a per-run host rule for citations. The two headline percentages describe the same matches relative to different populations.
The recalculation used the public table and did not run new prompts or recode the original answers. Each sector contributed one answer on one day, so the result does not measure stable sector differences. To calculate a brand’s placement share for a real panel, use row-level observations that identify the qualifying brands in each answer. Keep the original answer or an approved excerpt as evidence for disputed decisions.
Report missingness, drift and commercial outcomes separately
Use a Share of voice record with the prompt panel version, comparison set, run date, observed outcome, names, citations, uncertain matches and reviewer. Mark why a run is missing when the reason is known. If a platform declined to answer, decide whether that is an observed outcome under your protocol or a failed capture. Apply that choice consistently across periods. Keep the count of planned runs available even when the headline metric uses only observed answers.
A stable panel can still face changes in the market. New brands may start appearing while an established competitor drops out. Record outside placements separately so a rise in tracked share can be interpreted alongside changes outside the group. If you add competitors or prompts, version the panel and show a parallel result for the old definition where practical. A jump that coincides with a changed denominator cannot be attributed to the brand’s performance alone.
Keep Google Search Console impressions and clicks in a separate line. Google documents Search generative AI reporting for a site’s visibility in its own surfaces. That can provide property-level evidence, while the fixed prompt panel describes the answers your team observed and the comparison group it chose. A private analytics or CRM export would answer another question about visits or enquiries. No such export was used for this article. Google Search generative AI performance reporting
When reporting commercially, keep unknown attribution visible. An enquiry may mention an AI assistant, have a recognizable referral or have no identifiable source. Label those cases rather than allocating every enquiry to a channel. If an owner wants to compare placement share with enquiries, align the date range and category, then present both as separate measurements. A recorded mention is evidence about an answer. It does not show that a customer saw it or took action.
Give the reader one sentence that can travel with the chart. State the dates, product surface, panel size, comparison group and denominator. Put raw counts next to the percentage and include the number of missing runs. For a small batch, report individual observations when they explain the result. This makes a month-to-month comparison possible and gives another reviewer enough information to challenge or reproduce the calculation.
Keep one row for each planned run even when there is no answer to code. Within a captured answer, record the qualifying brand identifiers as a list or as linked placement rows. That structure lets a reviewer recalculate the totals without double-counting an answer that mentions several brands. Use a separate table for source hosts if you also measure citations. Joining the two tables without an explicit matching rule can multiply placements when a brand has several links.
For a repeat study, have a second reviewer code a small sample under the same rules. Compare disagreements about aliases, branch scope and prose-only mentions. Resolve those decisions in the codebook before applying them to the next period. If a new rule changes the historical totals, label the recalculated series and preserve the original definition.
AI Visibility is published by Lunasol, which offers GEO and AEO services. The real count comparison reuses a related-party published study. The three-brand example is fictional. About AI Visibility



